Goods Elevator
PLM/1000/4100/B/G
Goods Elevator Description
This goods elevator is a double pillar machine with a Safe Working Load of 1000 Kgs and a lift height of 4100mm. The lifting platform will be big enough to allow a standard pallet (1200 x 1000mm) to be loaded using a hand pallet truck. At the upper level, there will be a landing plate to allow easy unloading. The goods elevator is constructed from mild steel with a painted finish and would be bolted to the floor. Lifting with this goods elevator is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column.
Safety Guard to PD 5304:2005 Safety of Machinery
The safety guard is constructed from 40 x 40 x 3mm mild steel box section and 2mm mild steel sheet to meet the requirements of PD 5304:2005 Safety of Machinery. It would enclose the goods elevator to a height of 6300mm with a hinged door at each level through which the pallets can be loaded and unloaded. Each door is electrically interlocked to prevent the goods elevator being operated with a door open and in addition, the doors are mechanically locked closed whilst the machine is running. Each door may only be opened when the lifting carriage is at the appropriate level.
Goods Elevator Specification
|
DESCRIPTION
|
DOUBLE PILLAR GOODS ELEVATOR
|
|
MODEL No.
|
PLM/1000/4100/B/G
|
|
CAPACITY
|
1000Kgs
|
|
TIPPING HEIGHT
|
4100mm
|
|
OVERALL HEIGHT
|
6300mm
|
|
MACHINE HANDING
|
LEFT OR RIGHT HAND AVAILABLE
|
|
PLATFORM SIZE
|
1600 x 1300mm
|
|
CONTAINER DESCRIPTION
|
STANDARD PALLET 1200 x 1000mm
|
|
BASE ARRANGEMENT
|
BOLTED TO THE FLOOR
|
|
CONTROL CIRCUIT
|
24Vac (STANDARD)
|
|
ELECTRICAL RATING
|
IP65
|
|
LIMIT SWITCHES
|
ADJUSTABLE ROD
|
|
MOTOR DETAIL
|
2.2kW, 3 PHASE, 50 CYCLE, 415V
|
|
MOTOR BRAKE
|
415V SEPARATELY EXCITED
|
|
GEARBOX DETAIL
|
FLENDER
|
|
LIFT CHAIN
|
1" SIMPLEX SEDIS DELTA ‘Z’
|
|
TENSION CHAIN
|
3/4" SIMPLEX SEDIS DELTA ‘Z’
|
|
LIFT SPEED
|
6.4 METERS/MINUTE
|
Goods Elevator Application Story
This goods elevator was required to elevate a standard pallet (1200 x 1000mm) from a ground floor level onto a mezzanine floor at a height of 4100mm. This particular goods elevator had a ‘Z’ loading configuration so that the pallet was loaded at the front and unloaded at the back of the machine at the upper level. This goods elevator can be mounted on an existing floor and therefore does not require a pit to be created with the requisite drainage issues.
|