Base Handling Products Limited
Unit 20
Barleyfield Industrial Estate
Brynmawr
Gwent
NP23 4YF

Click here to
download Adobe
PDF reader

	Download Brochure
Guarded Crate Tipper

Single Pillar Guarded Crate Tipper

Single Pillar Guarded Crate Tipper Description

This single pillar guarded crate tipper is designed to lift and tip a single tray of salad (600 x 400 x 170mm High) at a height of 4150mm. The guarded crate tipper is constructed from Grade 304 stainless steel and is fully TIG welded throughout. The lifting is achieved by a food quality toothed timing belt driven by a motor gearbox mounted at the bottom of the main column. The guarded crate tipper is designed to be bolted to the floor.

Single Pillar Guarded Crate Tipper

Download Large Image

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 25mm aperture stainless steel weld mesh to meet the requirements of PD 5304:2005 Safety of Machinery. It would enclose the guarded crate tipper to a height of 2200mm on three sides with a hinged door on the fourth side. The guard door is electrically and mechanically interlocked preventing the guarded crate tipper from operating with the door open. In addition, the guard door can only be opened when the lifting carriage is at the full down position. The guarded crate tipper control system has provision for a ‘Call for Product’ signal to be connected.

Guarded Crate Tipper Specification

Guarded Crate Tipper Application Story

These 6 guarded crate tippers were designed for a salad processor to operate at high speed lifting and tipping their salad trays into vibratory feeders and subsequently into loose leaf salad packing lines. The guarded tray tippers are photographed in our factory being tested prior to dispatch.

Download CAD Image