Hydraulic Box Tipper for1000 Litre Stillages
BTH/150/1500/B/G
Hydraulic Box Tipper Description
This hydraulic box tipper is designed to lift and tip a Stillage (1200 x 950 x 855mm)
at a height of 1500mm into a transfer chute that feeds onto a sorting table. The
hydraulic box tipper is constructed from mild steel with a painted finish. This
hydraulic box tipper is powered via a hydraulic powerpack and tips the containers
by the extension of an hydraulic cylinder. The hydraulic box tipper operates on
a 'dead mans handle' principle and is designed to be bolted to the floor. The hydraulic
cylinder is fitted with an hydraulic fuse to prevent the box from falling in the
unlikely event of a hose failure.
Guarding
This hydraulic box tipper is fitted with side guards and a front guard only. The
guard is constructed from 40 x 40 x 3mm steel box section and 3mm wire, 40mm aperture
mild steel weld mesh with a painted finish. The side guards are 2200mm high and
extend along the length of the hydraulic box tipper and the front guard is approximately
1200mm high.
Hydraulic Box Tipper Specification
|
DESCRIPTION
|
HYDRAULIC BOX TIPPER
|
|
MODEL No.
|
BTH/150/1500/B/G
|
|
CAPACITY
|
150Kgs
|
|
TIPPING HEIGHT
|
1500mm
|
|
TIPPING ANGLE
|
100 DEGREES
|
|
MACHINE HANDING
|
LEFT OR RIGHT HAND AVAILABLE
|
|
TIPPING CHUTE
|
OPTIONAL
|
|
CONTAINER DESCRIPTION
|
STILLAGE 1200 x 950 x 855mm HIGH
|
|
BASE ARRANGEMENT
|
BOLTED TO THE FLOOR
|
|
CONTROL CIRCUIT
|
24Vac (STANDARD)
|
|
ELECTRICAL RATING
|
IP65
|
|
POWERPACK
|
415V, 50 Hz, 3 PHASE & NEUTRAL
|
Hydraulic Box Tipper Application Story
This hydraulic box tipper was required to lift and tip a stillage of coat hangers
onto a sorting table so that they could be recycled. The Stillages were loaded using
a hand pallet truck and the contents then lifted and tipped into a transfer chute.
The hydraulic box tipper had a large 3mm steel tipping chute that fitted the Stillage
closely to prevent product spillage and to provide additional reach into the transfer
chute.
|