Pneumatic Dolaf Tipper for1500 Litre Octobins
BTP/200/1000/B/G
Pneumatic Dolaf Tipper Description
This pneumatic dolaf tipper is designed to lift and tip an empty 1200 Litre stainless steel Dolaf bin at a height of 1000mm to allow the bin to be pressure washed. The bin is tipped through an angle of 100 degrees towards the operator to allow the interior and exterior to be washed. The pneumatic dolaf tipper is constructed from Grade 304 stainless steel and is a fully TIG welded construction throughout. The bin is lifted and tipped via a pair of pneumatic cylinders. The pneumatic dolaf tipper will operate on a 'dead mans handle' principle and is designed to be bolted to the floor.
Safety Guard to PD 5304:2005 Safety of Machinery
The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 20mm diameter stainless steel vertical tubes. The guard is at the front only because the pneumatic dolaf tipper is designed to be mounted into an alcove. The guard door is interlocked preventing the pneumatic dolaf tipper from operating with the door open. In addition, the guard door can only be opened when the lifting carriage is at the full down position.
Pneumatic Dolaf Tipper Specification
|
DESCRIPTION
|
PNEUMATIC DOLAF TIPPER/WASHER
|
|
MODEL No.
|
BTP/200/1000/B/G
|
|
CAPACITY
|
200Kgs
|
|
TIPPING HEIGHT
|
1000mm
|
|
TIPPING ANGLE
|
100 DEGREES
|
|
MACHINE HANDING
|
LEFT OR RIGHT HAND AVAILABLE
|
|
CONTAINER DESCRIPTION
|
1200 LITRE STAINLESS STEEL DOLAF BIN
|
|
BASE ARRANGEMENT
|
BOLTED TO THE FLOOR
|
|
CONTROL CIRCUIT
|
PNEUMATIC
|
|
LIMIT SWITCHES
|
PNEUMATIC
|
Pneumatic Dolaf Tipper Application Story
This pneumatic dolaf tipper was designed to lift and tip a large stainless steel Dolaf bin that had contained chicken meat for cleaning. The pneumatic dolaf tipper shown was mounted in an alcove and to load a bin the operator first opened the guard gate at the front. The bin could then be loaded using a hand pallet truck and once the gate was closed, the bin could be tipped towards the operator at an angle of 100 degrees. This allowed the inside of the bin to be washed thoroughly and the wash water could flow out of the bin freely.
|